High Precision Power Press
Top rated products
High Precision Power Press
The APA Series high precision power press uses a C-frame and a single-crank drive for sheet metal stamping. Press precision is listed as GB/JIS Class 1 in the catalogue. Models range from 15 to 315 tons, with different table sizes, strokes and die heights for different tooling requirements.
描述
1. High Precision Power Press Introduction
The APA Series high precision power press is designed for punching, blanking, bending and forming with suitable dies. A single crank drives the slide through one connection point. The C-frame provides access from the front and both sides for die installation and material handling.
The catalogue lists press precision as GB/JIS Class 1. Finished-part accuracy also depends on the die, material and production setup, so the press precision grade should not be treated as a tolerance guarantee for the stamped part.
Models are available from 15 to 315 tons. Stroke, operating speed, die height and working table dimensions vary by model and V/H specification.
2. High Precision Power Press Features
- Press precision listed as GB/JIS Class 1.
- Single-crank drive with one drive point on the slide.
- Open C-frame for access to the die and working area.
- Capacity range from 15 to 315 tons.
- V-type and H-type specifications on applicable models.
- Manual or motorized slide adjustment, depending on the model.
- Connection with feeders, straighteners and decoilers for coil-fed stamping.
3. Technical Specifications
| Specification | Unit | APA-45 | APA-60 | APA-80 | APA-110 |
|---|---|---|---|---|---|
| Model | — | V / H | V / H | V / H | V / H |
| Capacity | Ton | 45 | 60 | 80 | 110 |
| Rated tonnage point | mm | V: 3.2 / H: 1.6 | V: 4 / H: 2 | V: 4 / H: 2 | V: 6 / H: 3 |
| Variable speed | s.p.m | V: 40–100 / H: 100–150 | V: 35–90 / H: 80–120 | V: 35–80 / H: 80–120 | V: 30–60 / H: 60–90 |
| Stable speed | s.p.m | 75 | 65 | 65 | 50 |
| Stroke | mm | V: 80 / H: 50 | V: 120 / H: 60 | V: 150 / H: 70 | V: 180 / H: 80 |
| Die height | mm | V: 250 / H: 265 | V: 310 / H: 340 | V: 340 / H: 380 | V: 360 / H: 410 |
| Slide adjustment | mm | 60 | 75 | 80 | 80 |
| Slide area | mm | 560 × 340 × 60 | 700 × 400 × 70 | 770 × 420 × 70 | 910 × 470 × 80 |
| Bolster area | mm | 850 × 440 × 80 | 900 × 500 × 80 | 1000 × 550 × 90 | 1150 × 600 × 110 |
| Shank hole | mm | Ø38.1 | Ø50 | Ø50 | Ø50 |
| Main motor | kW × P | 5.5 × 4 | 5.5 × 4 | 7.5 × 4 | 11 × 4 |
| Slide adjustment device | — | Manual | Manual | Electrical driving | Electrical driving |
| Air pressure | kg/cm² | 6 | 6 | 6 | 6 |
| Press precision | — | GB/JIS Class 1 | GB/JIS Class 1 | GB/JIS Class 1 | GB/JIS Class 1 |
| Press dimensions (L × W × H) | mm | 1680 × 1105 × 2600 | 1690 × 1155 × 2900 | 1875 × 1310 × 3100 | 2000 × 1440 × 3300 |
| Press weight | Ton | 3.8 | 5.6 | 6.5 | 9.6 |
| Die cushion capacity | Ton | 2.3 | 3.6 | 3.6 | 6.3 |
| Die cushion stroke | mm | 50 | 70 | 70 | 80 |
| Die cushion effective area | mm² | 300 × 230 | 350 × 300 | 450 × 310 | 500 × 350 |
Contact Info
Address
No. 20, Yuanyuan Road, West District, Economic Development Zone, Guangde, Anhui
Tel
+86 19856369288
sales@deyupresses.com
Fax
+86-0512-57122000
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
