High Precision Steel Frame Press Machine
High Precision Steel Frame Press Machine
The DEYU APA Series high precision steel frame press machine features a C-frame structure and a single-crank drive for punching, blanking, bending and forming with suitable dies. The open working area provides access for die installation and material handling. Compare model-specific stroke, speed, die height and bolster dimensions to select a press for your production requirements.
描述
1. High Precision Steel Frame Press Machine Introduction
The DEYU APA Series high precision steel frame press machine is a C-frame mechanical press with a single-crank drive. The slide is driven through one connection point, while the open frame provides access from the front and both sides for tooling installation, material feeding and finished-part removal.
For precision stamping, the press and die must be evaluated together. The DEYU specification table lists press precision as GB/JIS Class 1. Finished-part accuracy also depends on die condition, material consistency, alignment and the production setup. The machine’s precision classification should therefore be considered alongside the requirements shown on the part drawing.
Die fit is another important selection factor. Check the slide and bolster dimensions, die height and slide adjustment range against the proposed tooling. These specifications vary by model and help determine whether the die can be installed and operated within the machine’s working space.
The APA Series covers capacities from 15 to 315 tons. V-type and H-type specifications offer different strokes and operating speeds on applicable models. Feeders, straighteners and decoilers can be matched to the press after reviewing the material and feeding requirements.
2. Product Features
- C-frame structure with access from the front and both sides.
- Single-crank drive with one connection point on the slide.
- Press precision listed as GB/JIS Class 1 in the DEYU specification table.
- Different slide and bolster dimensions to suit different tooling sizes.
- V-type and H-type stroke and speed specifications on applicable models.
- Compatibility with appropriately selected feeding equipment for coil-fed stamping.
3. Technical Specifications
| Specification | Unit | APA-80 | APA-110 | APA-160 |
|---|---|---|---|---|
| Model | — | V / H | V / H | V / H |
| Capacity | Ton | 80 | 110 | 160 |
| Rated tonnage point | mm | V: 4 / H: 2 | V: 6 / H: 3 | V: 6 / H: 3 |
| Variable speed | s.p.m | V: 35–80 / H: 80–120 | V: 30–60 / H: 60–90 | V: 20–50 / H: 40–70 |
| Stable speed | s.p.m | 65 | 50 | 35 |
| Stroke | mm | V: 150 / H: 70 | V: 180 / H: 80 | V: 200 / H: 90 |
| Die height | mm | V: 340 / H: 380 | V: 360 / H: 410 | V: 460 / H: 515 |
| Slide adjustment | mm | 80 | 80 | 100 |
| Slide area | mm | 770 × 420 × 70 | 910 × 470 × 80 | 990 × 550 × 90 |
| Bolster area | mm | 1000 × 550 × 90 | 1150 × 600 × 110 | 1250 × 800 × 140 |
| Shank hole | mm | Ø50 | Ø50 | Ø65 |
| Main motor | kW × P | 7.5 × 4 | 11 × 4 | 15 × 4 |
| Slide adjustment device | — | Manual operation | Electrical driving | Electrical driving |
| Air pressure | kg/cm² | 6 | 6 | 6 |
| Press precision | — | GB/JIS Class 1 | GB/JIS Class 1 | GB/JIS Class 1 |
| Press dimensions (L × W × H) | mm | 1875 × 1310 × 3100 | 2000 × 1440 × 3300 | 2420 × 1530 × 3800 |
| Press weight | Ton | 6.5 | 9.6 | 16 |
| Die cushion capacity | Ton | 3.6 | 6.3 | 10 |
| Die cushion stroke | mm | 70 | 80 | 80 |
| Die cushion effective area | mm² | 450 × 310 | 500 × 350 | 650 × 420 |
Contact Info
Address
No. 20, Yuanyuan Road, West District, Economic Development Zone, Guangde, Anhui
Tel
+86 19856369288
sales@deyupresses.com
Fax
+86-0512-57122000
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

















