Straight Slide Power Press
Straight Slide Power Press
The DEYU APD-160 is a 160-ton straight slide power press with a single-crank drive and a semi-closed frame. The V type offers a 200 mm stroke at 20–50 strokes per minute, while the H type offers a 90 mm stroke at 40–70 strokes per minute. Both versions have a 1,190 × 800 mm bolster for die mounting.
描述
1. Straight Slide Power Press Introduction
The DEYU APD-160 is a mechanical press for sheet metal stamping. Its welded steel frame is stress-relieved after welding. The APD-160 is available in two configurations, allowing manufacturers to select the slide travel and operating speed that suit their tooling.
For dies that require a longer working stroke, the V type provides 200 mm of slide travel. For shorter-stroke applications with a higher target production rate, the H type operates at up to 70 strokes per minute. The two versions also differ in die height and rated tonnage point, as shown below.
2. Features
- 160-ton capacity: The rated tonnage point is 6 mm above bottom dead center on the V type and 3 mm on the H type.
- Two stroke options: The V type pairs a 200 mm stroke with a speed range of 20–50 strokes/min. The H type pairs a 90 mm stroke with 40–70 strokes/min.
- Die mounting dimensions: Both versions have a 700 × 550 mm slide face and a 1,190 × 800 mm bolster. These dimensions provide a starting point for checking the fit of an existing die.
- Motorized slide adjustment: Both versions provide 100 mm of slide adjustment. The listed die height is 460 mm for the V type and 510 mm for the H type.
3. Straight Slide Power Press Specifications
The table compares four DEYU APD models. Where two values appear in one cell, the first applies to the V type and the second to the H type.
| Specification | Unit | APD-110 | APD-160 | APD-200 | APD-260 |
|---|---|---|---|---|---|
| Model variant | — | V / H | V / H | V / H | V / H |
| Rated capacity | ton | 110 | 160 | 200 | 260 |
| Rated tonnage point | mm | 6 / 3 | 6 / 3 | 6 / 3 | 7 / 3.5 |
| Slide stroke | mm | 180 / 80 | 200 / 90 | 200 / 100 | 250 / 150 |
| Die height | mm | 360 / 410 | 460 / 510 | 460 / 510 | 500 / 550 |
| Operating speed | strokes/min | 30–60 / 60–90 | 20–50 / 40–70 | 20–50 / 50–70 | 20–40 / 40–50 |
| Slide adjustment | mm | 80 | 100 | 110 | 120 |
| Slide dimensions | mm | 650 × 470 × 80 | 700 × 550 × 90 | 850 × 630 × 90 | 950 × 700 × 100 |
| Bolster dimensions | mm | 1100 × 600 × 110 | 1190 × 800 × 140 | 1380 × 770 × 160 | 1300 × 840 × 180 |
| Main motor | kW × poles | 11 × 4 | 15 × 4 | 18.5 × 4 | 22 × 4 |
| Slide adjustment method | — | Motorized | |||
| Air pressure | kgf/cm² | 6 | 6 | 6 | 6 |
| Press dimensions (L × W × H) | mm | 1420 × 1985 × 3200 | 1600 × 2200 × 3500 | 1750 × 2500 × 3900 | 2900 × 2080 × 4470 |
| Press weight | ton | 10.5 | 17.8 | 25.3 | 30 |
| Press precision | — | GB/JIS Class 1 | |||
| Die cushion capacity | ton | 6.3 | 10 | 14 | 14 |
| Die cushion stroke | mm | 80 | 80 | 100 | 100 |
| Die cushion effective dimensions | mm × mm | 500 × 350 | 650 × 420 | 710 × 480 | 810 × 480 |
Contact Info
Address
No. 20, Yuanyuan Road, West District, Economic Development Zone, Guangde, Anhui
Tel
+86 19856369288
sales@deyupresses.com
Fax
+86-0512-57122000
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.


















