Metal Sheet Press
Top rated products
Metal Sheet Press
The DEYU APE Series metal sheet press is a straight-side mechanical press for sheet metal stamping with suitable dies. Compare model-specific capacity, stroke, operating speed and tooling dimensions. Share your material specifications, part drawing and production requirements to discuss a suitable press and feeding configuration.
描述
1. Metal Sheet Press Introduction
The DEYU APE Series metal sheet press is designed for sheet metal stamping operations such as blanking, punching, bending and forming with suitable tooling. Its closed-frame structure has uprights on both sides of the working area, with the die mounted between the slide and bolster.
Choosing a press starts with the material and the part drawing. Material grade, thickness, cutting perimeter and forming geometry affect the required stamping force. These requirements should be assessed together with the tooling, rather than selecting a machine by nominal tonnage alone.
Die installation is another key consideration. Compare the die dimensions and working height with the press specifications, including slide dimensions, bolster dimensions, die height and slide adjustment range. The selected stroke must also provide sufficient clearance for the intended operation and part removal.
For coil-fed production, the feeder, straightener and decoiler need to match the material width, thickness and feed length. Operating speed should be reviewed together with die requirements and the feeding cycle. For individually loaded blanks, consider how the material will enter the die and how finished parts and scrap will be removed.
The specification table below compares selected APE models. Send DEYU your part drawing, material details, available die specifications and required output for a configuration review.
2. Product Features
- Straight-side, closed-frame mechanical press for sheet metal stamping.
- Suitable tooling can support blanking, punching, bending and forming operations.
- Model-specific capacity and stroke options for different production requirements.
- Slide and bolster dimensions listed for checking die fit.
- Motorized slide adjustment, with adjustment range specified by model.
- Operating speed selected according to the tooling and material feeding cycle.
- Feeding equipment configuration reviewed against material and production requirements.
3. Technical Specifications
| Specification | Unit | APE-300 | APE-400 | APE-500 | APE-600 |
|---|---|---|---|---|---|
| Model variant | — | S / H | Large-table S / Small-table S | S / H | S / H |
| Capacity | Ton | 300 | 400 | 500 | 600 |
| Rated tonnage point | mm | 7 / 3 | 7 / 7 | 12 / 7 | 12 / 7 |
| Stroke | mm | 300 / 170 | 300 / 300 | 350 / 300 | 350 / 300 |
| Strokes per minute | s.p.m. | 20–35 / 30–50 | 20–30 / 20–40 | 15–25 / 25–35 | 15–25 / 25–30 |
| Die height | mm | 550 / 450 | 550 / 550 | 600 / 600 | 600 / 600 |
| Slide adjustment | mm | 120 | 120 | 150 | 200 |
| Slide dimensions | mm | 2400 × 900 | 2900 × 1000 / 2400 × 1000 | 3300 × 1100 / 2800 × 1100 | 3400 × 1300 / 2900 × 1300 |
| Bolster dimensions | mm | 2500 × 1000 | 3200 × 1100 / 2700 × 1100 | 3500 × 1200 / 3000 × 1200 | 3600 × 1400 / 3100 × 1400 |
| Side opening | mm | 900 × 600 | 900 × 600 | 1000 × 800 | 1000 × 800 |
| Main motor | kW × P | 30 × 4 | 37 × 4 | 55 × 4 | 75 × 4 |
| Slide adjustment motor | kW × P | 2 × 4 | 2 × 4 | 3.7 × 4 | 5 × 4 |
| Air pressure | kg/cm² | 6 | 6 | 6 | 6 |
| Press precision | — | GB/JIS Class 1 | GB/JIS Class 1 | GB/JIS Class 1 | GB/JIS Class 1 |
| Press dimensions (L × W × H) | mm | 2899 × 3600 × 4729 | 3129 × 3800 × 5257 | 2899 × 3600 × 4729 | 3129 × 3800 × 5257 |
Contact Info
Address
No. 20, Yuanyuan Road, West District, Economic Development Zone, Guangde, Anhui
Tel
+86 19856369288
sales@deyupresses.com
Fax
+86-0512-57122000
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
