Crank Press Machine
Top rated products
Crank Press Machine
The DEYU APE Series crank press machine combines a double-crank drive with a straight-side, closed-frame structure for sheet metal stamping. Compare capacity, rated tonnage point, stroke and operating speed to match your tooling and production requirements.
描述
1. Crank Press Machine Introduction
The DEYU APE Series crank press machine uses a double-crank drive to operate the slide within a straight-side, closed-frame structure. With suitable dies, it can perform sheet metal stamping operations such as blanking, punching, bending and forming.
When selecting a crank press, review the rated tonnage point together with the nominal capacity. The specification table lists both values for each model variant. Share the force requirements of your stamping process with DEYU so that the proposed press can be checked against the intended operation.
Stroke length and operating speed should also match the tooling. A longer stroke provides additional slide travel, while the required working clearance depends on the die, part geometry and material handling arrangement. Select the operating speed with the feeding cycle and finished-part removal in mind.
The APE specifications include different model variants. In the table below, APE-300, APE-500 and APE-600 have S and H versions. APE-400 is listed with large-table S and small-table S versions. Compare the individual specifications rather than assuming that every model follows the same configuration.
Before confirming a machine, check die dimensions, working height and weight alongside the press capacity and working space. Send DEYU your part drawing, material grade and thickness, die specifications and required production output for a configuration review.
2. Product Features
- Double-crank drive for mechanical stamping operations.
- Straight-side, closed-frame structure.
- Capacity and rated tonnage point specified by model variant.
- Model-specific stroke lengths and operating speed ranges.
- Different slide and bolster dimensions for checking tooling compatibility.
- Motorized slide adjustment with a specified adjustment range.
- Feeding and part removal requirements reviewed together with the press configuration.
3. Technical Specifications
| Specification | Unit | APE-300 | APE-400 | APE-500 | APE-600 |
|---|---|---|---|---|---|
| Model variant | — | S / H | Large-table S / Small-table S | S / H | S / H |
| Capacity | Ton | 300 | 400 | 500 | 600 |
| Rated tonnage point | mm | 7 / 3 | 7 / 7 | 12 / 7 | 12 / 7 |
| Stroke | mm | 300 / 170 | 300 / 300 | 350 / 300 | 350 / 300 |
| Strokes per minute | s.p.m. | 20–35 / 30–50 | 20–30 / 20–40 | 15–25 / 25–35 | 15–25 / 25–30 |
| Die height | mm | 550 / 450 | 550 / 550 | 600 / 600 | 600 / 600 |
| Slide adjustment | mm | 120 | 120 | 150 | 200 |
| Slide dimensions | mm | 2400 × 900 | 2900 × 1000 / 2400 × 1000 | 3300 × 1100 / 2800 × 1100 | 3400 × 1300 / 2900 × 1300 |
| Bolster dimensions | mm | 2500 × 1000 | 3200 × 1100 / 2700 × 1100 | 3500 × 1200 / 3000 × 1200 | 3600 × 1400 / 3100 × 1400 |
| Side opening | mm | 900 × 600 | 900 × 600 | 1000 × 800 | 1000 × 800 |
| Main motor | kW × P | 30 × 4 | 37 × 4 | 55 × 4 | 75 × 4 |
| Slide adjustment motor | kW × P | 2 × 4 | 2 × 4 | 3.7 × 4 | 5 × 4 |
| Air pressure | kg/cm² | 6 | 6 | 6 | 6 |
| Press precision | — | GB/JIS Class 1 | GB/JIS Class 1 | GB/JIS Class 1 | GB/JIS Class 1 |
| Press dimensions (L × W × H) | mm | 2899 × 3600 × 4729 | 3129 × 3800 × 5257 | 2899 × 3600 × 4729 | 3129 × 3800 × 5257 |
Contact Info
Address
No. 20, Yuanyuan Road, West District, Economic Development Zone, Guangde, Anhui
Tel
+86 19856369288
sales@deyupresses.com
Fax
+86-0512-57122000
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
