Metal Stamping Press Machine

Metal Stamping Press Machine

Capacity: 160, 200, 260, 300, 400, 500 and 600 tons.
The DEYU APF series consists of single-crank mechanical presses for sheet metal stamping. Compare stroke length, operating speed and die mounting dimensions to select a press for your tooling and production requirements.

    描述

    1. Metal Stamping Press Machine Introduction

    The DEYU APF series consists of closed-frame, single-crank mechanical presses for sheet metal punching, blanking and forming. The full series covers seven capacities from 160 to 600 tons. This page compares the APF-160, APF-200 and APF-260.

    When selecting a metal stamping press machine for an existing die, check the upper die shoe against the slide face and the lower die shoe against the bolster. Then compare the die’s closed height, required stroke and target operating speed with the specifications below. For a new part, send DEYU the part drawing, material grade, sheet thickness and target output for a model recommendation.

    2. Metal Stamping Press Machine Features

    • Die mounting space: The bolster mounting surface measures 1,100 × 700 mm on the APF-160, 1,200 × 800 mm on the APF-200 and 1,250 × 850 mm on the APF-260.
    • Stroke length and speed: The APF-160 and APF-200 have a 200 mm stroke and operate at 20–50 strokes per minute. The APF-260 has a longer 250 mm stroke and operates at 20–40 strokes per minute.
    • Motorized slide adjustment: The APF-160 and APF-200 both have a maximum die height of 460 mm, with 100 mm and 110 mm of slide adjustment, respectively. The APF-260 has a maximum die height of 500 mm and 120 mm of slide adjustment.
    • Optional equipment: The press can be configured with an automatic feeder, die cushion or slide ejector to suit the stamping application.

    3. Metal Stamping Press Machine Specifications

    The table compares the V-type configurations of the APF-160, APF-200 and APF-260. Slide and bolster dimensions are listed from left to right (LR) and front to back (FB). The third bolster dimension is the plate thickness.

    SpecificationUnitAPF-160APF-200APF-260
    Model type—VVV
    Rated capacitytons160200260
    Rated tonnage pointmm667
    Stroke lengthmm200200250
    Operating speedstrokes/min20–5020–5020–40
    Maximum die height (S.D.A.U.)mm460460500
    Slide adjustmentmm100110120
    Slide dimensions (LR × FB)mm900 × 6001000 × 7001100 × 700
    Bolster dimensions (LR × FB × thickness)mm1100 × 700 × 1401200 × 800 × 1701250 × 850 × 180
    Side openingmm650 × 500750 × 550750 × 550
    Main motorkW × poles15 × 418.5 × 422 × 4
    Air supply pressurekgf/cm²666
    Press accuracy—GB/JIS Class 1

    Contact Info

    Address

    No. 20, Yuanyuan Road, West District, Economic Development Zone, Guangde, Anhui

    Tel

    +86 19856369288

    mail

    sales@deyupresses.com

    Fax

    +86-0512-57122000

    For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.